The Ultimate Guide To Buying A New Air Conditioner

Home » oldsmar ac and heating services

The Ultimate Guide To Buying A New Air Conditioner

So, are you ready to purchase your first air conditioner (AC) or upgrade your older one to a new one? An AC unit can be all the difference between your home or office being an unbearable, sweltering nightmare or a cool, comfortable paradise. However, before pulling the trigger there are many factors you should consider to ensure that you get the most out of your new unit.

The main concept that needs to be grasped is that there is no “one size fits all” solution when it comes to cooling your property as each space comes with its own set of requirements so selecting the best AC for your specific needs is crucial. We’ve listed out some of the key points to evaluate prior to making your purchase decision. And while the below tips can be applied universally without restriction, if you’re looking to buy a new AC in Westchase, our team of qualified, friendly technicians are always at hand if you need any more advice on how you can beat the heat and buy the best AC for your specific needs.

 

Table Of Content:

  1. Figure out your cooling requirement
  2. Buy the most efficient models with SEER
  3. Select the appropriate AC type
  4. Choose the best air conditioner brand and model for your needs
  5. Proper installation
  6. Smart features add modern convenience to your AC
  7. Taking care of it

Figure out your cooling requirement

Ensuring you buy an AC that meets the cooling requirement for your exact needs is vital to maximizing the lifetime of your unit as well as saving on electricity costs through better efficiency. An air conditioner’s BTU (British Thermal Unit) rating is used to determine the cooling capacity of the unit and its ability to cool a room or space. A simplified way of looking at BTU is to think of BTU in air conditioner’s as horsepower in cars. Just as a car with higher horsepower will drive faster and perform better, an air conditioner with a higher BTU rating can cool a larger space more effectively and efficiently. Conversely, an AC with a lower BTU would be more suitable for cooling a smaller space with lower cooling requirements.

If the BTU rating is too high, the unit would be less efficient because it would be consuming more energy to cool the area. It would also be switching on and off constantly resulting in more wear than normal as it tried to maintain the temperature. If the BTU rating is too low, it could struggle to cool the room while also running constantly resulting in excess wear.

In general, some of the main factors to consider when you are working out the BTU rating for your AC requirements are:

  • The local climate
  • Room size, dimensions, and layout
  • Insulation
  • The amount of direct sunshine on your property
  • Windows in the room
  • Expected average occupancy
  • Availability of heat-generating appliances

You can work out an approximation of the BTU requirement for your room using online BTU calculators.

Do note however that these calculators only offer an approximation but you should always get a qualified technician to evaluate your cooling requirements before investing in an AC. And in case you’re looking for an AC in the Westchase area, click here for a free consultation

Buy the most efficient models with SEER

Seasonal Energy Efficiency Rating (SEER) is a measure of how efficient and green an air conditioner is. The higher the rating, the more efficient the unit is, which would help to drive down operational costs. A rating of 14 or higher is considered a good SEER, though highly efficient units can have ratings as high as 23. The United States Department of Energy has established minimum SEER ratings over the years ranging by state (North and South/South West states are the typical two groups) and in 2023 the minimum will be raised to 14 in the Northern states and 15 in the South/South Western states.

Generally, the upfront costs to purchase a highly rated model is higher the more highly rated, however, you would also enjoy long-term operational savings in electricity consumption. Generally accepted advice is to shop for an air conditioner unit with a minimum SEER of 14 – 16.

Select the appropriate AC type

Depending on your budget, your home layout, cooling requirements and more, you should purchase the type of AC that best fits your needs. There are 8 different, popular AC options: central (ducted) ACs, ductless mini-split ACs, window ACs, portable ACs, floor-mounted ACs, smart ACs, Geothermal AC systems, and hybrid/Dual fuel ACs. We will go into detail on each type of AC in a separate article (or if an article is already available link here), however, the choice of type of AC to install will be a key consideration when it comes to immediate cost (both installation and purchase) and short term cost (operational and maintenance) as each comes with its own benefits and drawbacks.

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

BOOK NOW!

Choose the best air conditioner brand and model for your needs

After you’ve selected the type of AC you want to install, do some research into the various popular brands and models in that AC category to settle on one that provides high-quality, efficient models while remaining within your budget. Well-known brands are usually known for a reason, they provide high-quality units that meet their customer’s needs. It can be beneficial in the long run to stretch your budget to try and accommodate the better brands or models if possible, as an AC is a long-term investment that comes with its own set of operational costs.

Furthermore, make sure to understand the warranty coverage and service requirements prior to purchasing as this will be crucial in the long-term care of your new AC unit.

Another overlooked point of consideration is the amount of sound the AC can generate, especially when it is at max load. It can become downright annoying to have a steady droning in the background or intermittent bursts of noise to distract at inopportune moments. Try to select one that has a relatively low noise level, usually less than 60 decibels.

Consulting with a qualified contractor can help in this process as they have years of experience installing and maintaining AC units and they can use their knowledge to advise on the best brand and unit to meet your needs and budget. They would also be able to advise you on the recommended maintenance schedule to keep your AC running smoothly.

Proper installation

While it is possible to install some AC units without professional advice or assistance, should the installation be done improperly, it could lead to cooling inefficiencies, higher energy bills, and even damage to your unit. Don’t skimp out on this stage as a professional installation could make all the difference on whether your AC provides the best possible cooling and efficiency, especially in the long run. While making the purchase decision is a key part of the process, it is meaningless if the unit is not properly installed.

Speaking to a few local contractors in your area from the outset of your buying journey can help you along at all stages, from providing you with expert opinion on the required BTU and type of AC unit to providing you with estimates based on your requirements and budgets to finally installing and maintaining your AC units. Just like the actual AC unit, you get what you pay for and what you spend on home refurbishments and repairs ultimately reflect on the quality and longevity of the work. Working with a reliable contractor can ensure the installation is compliant with local building codes and regulations and that proper equipment is used during the installation.  

A DIY installation may also run the risk of not being covered by a manufacturer warranty and (depending on the brand, AC type, and model) may necessitate a professional installation to be covered by the warranty.

Should you make the (wise) decision to use a professional service, it is important you choose the right one for the job, you can find 6 Attributes of a Good HVAC company here, to help you in the selection process. Requesting quotes from multiple contractors can also help you in your selection process, as you can identify more favorable services for the best possible price when doing so.

Smart features add modern convenience to your AC

Most modern ACs come with some level of automation or smart features that will allow you to remotely control your AC, such as automating the on/off times based on your schedule to monitoring the maintenance needs of the unit, and providing you with historical stats on usage. Depending on your home setup, you may want an AC that is compatible with the rest of your smart home setup, so make it a point to make sure AC smart features would work with your smart home platform of choice. These features can just be nice to have conveniences but some also improve the overall efficiency and usage of your unit.

Taking care of it

So you’ve sprung for the perfect AC unit that covers your cooling requirements, is from a reputed brand, and was professionally installed? Great, chapter closed and now it’s just time to sit back and enjoy your sweat-free, cold (but not too cold) paradise, right? Not quite. No matter how perfect your selection and installation may be, things can always go wrong usually with the passage of time and regular wear and tear.

This is why the service plan and warranty are key steps in the purchase decision. Making sure you’re covered by an industry standard or leading warranty will ensure that a defective unit doesn’t break the bank to repair while a structured service plan will ensure to limit the wear on your unit to ensure it’s working at its optimal capacity.

 

Conclusion

We hope the guide provides you with direction when it comes to making one of the best quality-of-life purchasing decisions you can make.

Should you require any more information, or are looking to purchase a new AC in the Westchase area, Easy Breezy AC’s team of certified technicians are always ready to help. With nearly 4000 active commercial and residential customers, Easy Breezy A/C is Pasco, Pinellas and Hillsborough Counties’ most trusted HVAC company for a reason! Contact us now!

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=


Factors That Are Affecting Your Home AC Performance

Home » oldsmar ac and heating services

AC sales in Tampa

High-efficiency air conditioning systems provide homeowners with many excellent benefits including a comfortable home. But at some point, you observe it is not functioning as it supposed to be. What could be the main reason? Discover what significant factors are that affect the overall performance of your New AC unit.

 

Table Of Content:
  1. Unit Size
  2. Poor Airflow
  3. Air Leaks
  4. Poor Insulation
  5. Duct Conditions
  6. Cooling Load
  7. Debris on the Outside Unit
  8. Dust in the Air Filters
  9. Age of the Air Conditioning Unit
  10. Thermostat Problems
  11. Maintenance

 

  1. Unit Size

Size plays an integral part in the performance of your HVAC. Larger ACs will cool or warm home immediately, while smaller units will have struggle meeting your temperature needs. Not to mention, too large of an air conditioning system can cause it to cycle on and off, eventually wasting valuable energy.

 

  1. Poor Airflow

There are various things that affect the airflow of your unit. Dirty condenser coils, for instance, limit airflow and affect cooling performance. The filter becomes dirty over time as it gets rid of dust and other particles from the air, thereby, minimizing airflow. A condenser unit that is choked up by obstructions, such as leaves, is another issue to tackle. You need to clean the coils at least once every season to eliminate dirt and dust (or have a professional ac repair technician clean them for you).

 

  1. Air Leaks

Cracks around windows and doors as well as damage to the roof or poorly-sealed pipes and ducts can all enable air exchange. This ultimately affects the humidity and temperature of the air in your home and the performance of your air conditioner.

 

  1. Poor Insulation

A poorly performing insulation also affects the efficiency of your AC system. It allows the heat to transfer between the interior spaces of your residential and outdoor air, which increases the temperature and requires ample amount of work from your unit to achieve the right cooling level as per your demand.

 

  1. Duct Conditions

Air ducts supply the air to the rest of your house. So, if they are clogged, leaking, dirty, or in bad condition, the overall efficiency of your air conditioning unit is at stake. Clear out severe buildup and patch holes to ensure your ducts perform their role appropriately. But since ducts are hard to see, allow an HVAC professional to diagnose your ductwork for potential issues.

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

 

BOOK NOW!
 

 

 

  1. Cooling Load

The amount of area your AC has to cool, the location of the unit, the heat produced inside, and other significant factors combine to make a cooling load for the unit. The higher the cooling load, the harder it is for your air conditioner to cool efficiently.

 

  1. Debris on the Outside Unit

Debris surrounding outside unit are common, affecting the AC’s performance. Make sure the unit is always clean and free from debris. First, vegetation and bushes must not slow down airflow. Allow your unit to have enough room to breathe.

 

  1. Dust in the Air Filters

There are still some homeowners who do not see filter replacement as an important task. This should not be the case, though, because you are only allowing your unit to lose efficiency. Change the filters every month or every 2 months to keep airflow moving and reduce dust.

 

  1. Age of the Air Conditioning Unit

The AC’s age is another obvious reason why the performance of your unit is deteriorating. Models that are twenty years or older are possibly to be less energy efficient. Over time, the HVAC system loses their efficiency as well. The average lifespan of an air conditioner is around 15-20 years. But somehow you can update your AC system with AC repair service and have it running smoothly again, at least for some years more.

 

  1. Thermostat Problems

All air conditioning units depend on thermostat setting to determine when your indoor air needs cooling. Insufficient cooling is the main issue here, mainly due to a malfunctioned thermostat or a thermostat that is not properly set. If necessary, the battery.  

 

  1. Maintenance

Your air conditioning system essentially requires routine cleaning and maintenance to work properly. Sure, you can clean the coils and change the filters on your own, but maintaining your unit requires more than just that. There are other tasks that need the assistance and help of a professional HVAC, like ductwork cleaning and checking refrigerant levels.

Air conditioning units are among the prized machines of your home as they contribute a lot to make your home very comfortable to live in. These units conserve more energy, save money, and give better results.

However, if you want to know more about this topic, please do not hesitate to contact us to receive more information about it!

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=


Dirty Sock Syndrome Part 2

Home » oldsmar ac and heating services

AC replacement in Tampa, Westchase, Safety Harbor

As we saw in Part 1, Dirty Sock Syndrome is caused by bacterial and fungal growth on the evaporator coil. In this article, we will discuss how to treat prevent the problem.

 

So, you have Dirty Sock Syndrome. Now What?

The good news is that there are ways you can fix dirty sock syndrome and enjoy high-quality indoor air.

Cleaning is your first remedy. You will need to do a thorough cleaning of the evaporator coils to get rid of mold and bacteria living inside as well as stop your house from smelling like an old gym bag. Use cleaning products along with gloves and wear clothes you don’t mind getting messy. Although, a DIY job is only recommended to those who have sufficient knowledge and proper tools.

Otherwise, call in a professional to do the work on your behalf. The HVAC professionals at EasyBreezy AC will first diagnose the problem and then clean the coil and drain pan. Specialists make use of non-acid or low-acid cleaners to effectively kill mold while not damaging the subtle inner workings of your AC unit. Book an appointment with a trusted air conditioning company now to treat your Dirty Sock Syndrome. Don’t forget to have regular maintenance and inspections scheduled once or twice a year to prevent further issues from happening.

You should also consider coating the drain pans and coils. The coating material should contain an antibacterial agent which prevents regrowth of mold. While the antimicrobial coating is effective, it is still imperative to keep your coils clean as possible because the buildup of organic material produces a base for mold and mildew to grow. Doing so will assure smooth performance of your air conditioning.

If any of these measures do not prove to be highly effective for you, then it is time to replace the coils and maintain them to ensure the problem won’t return. You have to take into account your unit’s age, though. If it is already fairly old (12+ years), it may just be time to get a whole new unit.

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

 

BOOK NOW!
 

 

How to Treat Dirty Sock Syndrome

  1. Choose a high-quality air conditioning filter

    Bacteria, mold, and mildew need porous substances to grow. Get rid of them from the air before they get in your coils.

  2. Use a whole home air purifier

    They prove to be an excellent aid in killing mold and bacteria. Here at EasyBreezy A/C, we recommend cold plasma ionizers. They are especially ideal for people with compromised immune system, asthma, or allergy problems. A UV light is another option we can provide (though we prefer non-ozone producing IAQ products).

  3. Hire a professional to clean your coil

    While you can perform basic cleaning all alone, it is far better to team up with a professional for help. They will have special cleaners available to them that are designed to clean evaporator coils.

 

Prevention is Key!

Your AC unit is one of the biggest investments you can make for your home. Don’t let dirty sock syndrome give you so much stress. Early prevention is your best solution.

 

How to prevent Dirty Sock Syndrome?

1. Keeping up with the routine maintenance of your air conditioner is one of the best ways to prevent all sorts of problems with your AC.
2. Change your air filters regularly. If your filter tends to get dirty quickly, then there may be another problem with your system.
3. Installing a whole home indoor air quality (IAQ) product, like the Phenomenal Aire, will dramatically help reduce and prevent bacteria, fungus, and mold growth in your home.

No matter what the season is, it is always important to make sure your air conditioning unit is working efficiently and not converting into an ideal ground for dirty sock syndrome.

However, if you do not see the problem clearly or none of these tips helped you to solve your A/C problem, please do not hesitate to contact us to receive more information about it!

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=


Dirty Sock Syndrome Part 1

Home » oldsmar ac and heating services

AC replacement in Tampa, Westchase, Safety Harbor Florida

Upon entering your home, the first thing you noticed is the stinky odor. It is not the garbage, neither the piled-up laundry of your little munchkins. What could be the culprit then?

Your air conditioning.

Your house might be suffering from dirty sock syndrome.

The average American spends almost 93 percent of their life indoors, which makes indoor air quality an immediate issue. Dirty sock syndrome attacks most homes, and you need to pay strict attention to it.

In this two-part article series, we will discuss what dirty sock syndrome actually is, what causes it, and how to solve it efficiently.

You can jump to part two here.

 

Table Of Content:
  1. What Is Dirty Sock Syndrome?
  2. What Causes Dirty Sock Syndrome?
  3. Is Dirty Sock Syndrome Dangerous?

 

  1. What Is Dirty Sock Syndrome?

Dirty sock syndrome is a stale, foul-smelling odor that is often produced from an air conditioner with a dirty coil. This coil is the heat pump coil in the blower or air handler of your AC. Apart from a very dirty coil, there are also little microbial organisms present that feed on the dust, dirt, and other things that’s accumulated on it. This is why your home is dealing with a terrible smell.
The smell travels as your AC pushes air around the home, making all rooms have a disgusting odor. Some homeowners mistake dirty sock syndrome as a mold problem because of its mold-like smell. This can cause for a serious concern since mold leads to headaches and other health issues.

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

 

BOOK NOW!
 

 

  1. What Causes Dirty Sock Syndrome?

Bacteria and fungus growing on the evaporator coil.
Constant use of your air conditioning can cause moisture formation on the evaporator coils. Dust will then be collected inside the system and fasten itself to the coils.
Once attached, the dust and moisture can grow bacteria. The cold and hot temperatures used by the air conditioning makes it an excellent place for the bacteria to flourish.
The bacteria and fungus growth will lead your AC system to slow rot from within. It is because of the decomposition that you smell a stinky odor when the unit is on.

 

  1. Is Dirty Sock Syndrome Dangerous?

No doubt, dirty sock syndrome smells horrible and is a real annoyance. But fortunately, it is not usually considered devastating or life-threatening since the mildew and bacteria are not extremely hazardous to the health but could irritate asthma or other respiratory conditions.
Though at some point, dirty sock syndrome can pose health risks if mold occurs in the air conditioning unit and starts to develop. It can cause sneezing and coughing and those with severe allergies, asthma, or have respiratory problems will likely the suffer most.
You may also experience eye irritation and difficulty breathing if mold grows within your system. The strong smell from the AC unit can make you feel sick too. Long exposure to mold also carries long-term health risks as it emits microbial volatile organic compounds – gasses which generate the odor that associated with mold.

If you have Dirty Sock Syndrome or mold has grown inside your AC, you need have a professional  conduct an immediate, thorough inspection and cleaning of the HVAC system. Se here at EasyBreeze will be more than ready to hlp you solve this issue, we are a call of distance!

See Dirty Sock Syndrome Part 2 for solutions and tips for prevention.

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=


How-to Tips For AC Use In Florida Winter

Home » oldsmar ac and heating services

AC sales and installation Tampa

Winter is just around the corner! You are almost ready – how about your air conditioning unit? Check out our important tips you can take so as to ensure the best performance of your unit in the next summer season!

 

Table Of Content:
  1. Check And Replace The Air Filter
  2. Change The Thermostat Settings
  3. Give The AC System A Thorough Cleaning
  4. Don’t Forget The Ducts
  5. Cover Your Unit
  6. Change Worn-Out Components
  7. Maintain A Consistent Temperature
  8. Schedule A Maintenance Check Up

 

How to prepare your AC for Winter

 

  1. Check And Replace The Air Filter

When was the last time you look over the filter of your AC unit? Cleaning the filter is specifically crucial if you run the unit often. The filter’s purpose is to ensure healthy air and good airflow as well as prevent and protect air conditioning from breaking down. This will also save your energy costs. Replace the air filter at least every two months, preferably every month. We recommend changing your filter every time you get your power bill. It is an easy reminder that it has been a month.

 

  1. Change The Thermostat Settings

In order to enjoy electricity savings and home comfort during winter months, consider programmable thermostats. A programmable thermostat allows you to set humidity and temperature according to the weather condition and to your schedule

  1. Give The AC System A Thorough Cleaning

Winter can cause debris and leaves to accumulate around or on your AC system. Debris is responsible for minimizing the flow of air and can lead to other issues. Give the exterior casings, inner coils, and other frequently used parts a rigorous cleaning before the wind gets chilling. Another important air-conditioning component you should thoroughly clean is the outdoor condenser.

 

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

 

BOOK NOW!
 

 

  1. Don’t Forget The Ducts

Dirt and debris, dust mites, pet dander, pollen, and other allergens can get stuck in the air ducts, contributing to a dangerous living environment. You are likely putting yourself at risk for health issues (e.g., hay fever flare-ups) if you are sensitive to allergens or contaminants. Therefore, it is hard to overlook the importance of getting your air ducts clean. Cleaning your ducts can also help reduce odors in your home.

  1. Cover Your Unit

There are two benefits associated with a covered air conditioning unit: (1) keep your system from freezing rain, winds, and animals; and (2) prevent thieves who might be looking for air conditioning units to ransack for copper wiring. Your local store will give you lots of options to choose from.

  1. Change Worn-Out Components

If you want your unit to work smoothly and efficiently year-round, most especially in the cool months, now is the right time to replace parts that are worn-out or have outdated. Assuming the AC you own is more than five years old already, have it inspected by an HVAC professional. Any parts or damages will be detected to do replacement before a major issue arises.

  1. Maintain A Consistent Temperature

As much as possible, avoid big temperature changes. Otherwise, you will notice a big spike in your energy bills. Consider using a ceiling fan or turning off your AC during cool nights or days. Aside from reducing the work of your air conditioning, it is also an excellent way for improving your overall comfort.

  1. Schedule A Maintenance Check Up

Preventive maintenance is one of the great solutions to protect air conditioning units from potentially expensive repairs. Spending a little bit now on an annual maintenance checkup means saving plenty by avoiding costly repairs later. Most companies or AC service providers offer new duct systems and replacement of air conditioning and heating equipment aside from preventive maintenance, so if there is an issue, they can easily get to work.

 

Winter is a perfect time to get warm inside and do things you love most, such as cooking your favorite food and having movie marathon – all with the warm air coming from your HVAC unit. Take advantage of the season while it lasts!

Lastly, if you want to know more about this topic, do not hesitate to contact us to receive more information about it!

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=


What Temperature Should I Set My Thermostat To While Away?

Home » oldsmar ac and heating services

AC and heating services in the tampa bay area

What temperature should you set your thermostat to while away? Well, that depends, mostly on preference and goal. Here are some tips from the professionals at EasyBreezy A/C.

Before we begin, the most important step is: Invest In A Programmable Thermostat

There is actually no perfect home temperature no matter what the season is or whether you are away or not – that mostly depends on the demands of homeowners. But if you want to make adjusting temperature less hassle on your part, consider what a programmable thermostat can do for you and always remember to hire professionals in AC.

It enables you to set different temperatures all through the day, depending on various factors such as when you are home, when the house is empty, the time of the day, and the weather condition. Simply plug it, the programmable thermostat allows you to “set and forget.” You can even control the temperature through your tablet or smartphone with most programmable thermostats sold these days.

 

Now the tips:

 

What should be your thermostat setting when you are away for business or a holiday vacation?

Well, you do not want your unit to be completely off with no air movement. BUT, you also do not want to leave the AC running at full blast, cooling the house when no one is there to enjoy it. There is a Goldilocks zone in the middle.


If your trip is in the middle of summer or even in the early warmer months, set your thermostat closer to 80° F. This will help you to save energy (and subsequently, money on your cooling bill) while you are away. If you have a programmable thermostat, you don’t have to wait for your home to cool down until after you get home. Adjust the thermostats settings so that it begins to cool off about an hour before you get home.


As for vacations in the winter, Florida doesn’t get many consistently cold days – at least not until January, so set your thermostat to auto so it can switch to heat or cooling as needed and keep the cooling around 78° and the heat around 64°. Since you won’t be home, it won’t need to kick on as much while you are gone.

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

 

BOOK NOW!
 

 

What temperature should I set my thermostat in the summer and spring?

During summer and spring seasons, the temperature increases in the home just as it does outside, which can make it extremely uncomfortable without the air conditioner running. However, it can be costly for keeping our home cool during the extreme heat of Florida summer. This is where thermostat setting comes very beneficial as it can help us save more in our energy bills but still manage to be comfortable while at home.


When you’ll only be gone during the day, you can program your thermostat to adjust while you are gone to a few degrees warmer and then begin cooling again when you are on your way home from work. Just like while on vacation, there is no need to have heir air conditioner working overtime when you aren’t home to enjoy it.


When you are home, your temperature can be set to personal preference but if your cooling bill is too high, consider rising your normal temperature up 2 or 3 degrees. Even a small change can make an improvement on your energy bill.

 

What temperature should I set my thermostat in the winter and fall?

The ideal temperature range during winter is from 60-65 °F, though, most people prefer 68 degrees.
The best temperature during the winter will really be your preference but if cutting down costs or energy usage is your goal, then lowering the temperature for your heater will help lower your bills.

If these tips helped you to solve your A/C problem, you want more orientation or you want request a service, please do not hesitate tocontact us to receive more information about it!

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=


Why Does My Air Conditioner Leak Or Drip Water?

Home » oldsmar ac and heating services

Why Does My Air Conditioner Leak Or Drip Water

Most of the time, people rarely give their air conditioners much thought until there is a problem and it needs troubleshooting. One common problem with air conditioning unit is they end up leaking water inside. If your air conditioner has this problem, then here is some information you should know about the cause, and how you can fix it.

 

Table Of Content:
  1. Humidity in the Air
  2. Causes Of Leaking Air Conditioners
  3. Clogged Drain Lines
  4. Icy Coils
  5. Dirty Air Filter

 

  1. Humidity in the Air

Humidity is the amount of water in the atmosphere. The function of an air conditioner is to remove the moisture in the air. This then reduces the humidity levels in your home and can be the cause of the water you see “leaking” from your unit.

Generally, your air conditioner producing water is a good sign – you’ll likely see the water draining out of the back of the AC unit outdoors. However, if water is not draining here, then there might be a problem – like it is draining where it shouldn’t or is clogged in your unit.

 

  1. Causes Of Leaking Air Conditioners

Air conditioners usually produce water as part of their operating process. It comes out of a specific drain line. However, if the water is coming from somewhere else, then your air conditioner is leaking and will need fixing. Some of the causes of a leaky air conditioner include:

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

BOOK NOW!

 

 

  1. Clogged Drain Lines

Air conditioners produce a lot of water, and they usually discharge it down the drain line. If the line is clogged, the water will end up backed-up inside. A clogged drain line can cause water to leak out of other areas. If your air conditioner is leaking water indoors, the first thing you want to do is unplug it (water and electricity don’t mix). Next, you’ll want to inspect the drain lines and clear out any debris that may be clogging it. If you are the DIY-type, then you can use a shopvac to clean out the drain line. If not, troubleshoot with another possibility below or contact an AC repair company, like EasyBreezy A/C to help you get your air conditioner back to normal.

If you have a really old unit that is still going, it may drain into a pan. Check to ensure the pan has not rusted or damaged as these effects can cause leaking.

 

  1. Icy Coils

If the water is not draining properly, it can back up over the cooling coils. As a result, the water freezes over the coils. To check for this use, turn off your unit and open the cage to inspect the coils. This can be complicated for homeowners unfamiliar with their AC unit – if so, give us a call to solve your leaking air conditioning issue.

 

  1. Dirty Air Filter

Now… we put this down here at the bottom, because we know that you regularly change your filters, right?  We have found that dirty filters are the number one cause of water leaks in your air handler. If it has been several months since you changed your air filter, it COULD be the cause of the AC leaking.  When the air conditioning’s air filter is dirty, it inhibits proper air flow over the evaporator coils. As a result, the coil gets too cold and freezes – and when it thaws, it leaks.

 

Call An Air Conditioning Pro

If you cannot find the source of your leak or your troubleshooting methods have not resolved the AC leaking issue, contact EasyBreezy A/C to fully inspect your unit for the source of your problem. Our skilled and professional AC technicians will help your air conditioner get back to normal.

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=


Why Would An Air-Conditioner Stop Working?

Home » oldsmar ac and heating services

Why Would An Air-Conditioner Stop Working in Tampa Florida

We have come in an age of a constantly moving forward economy. The living conditions that were only for the privileged rich in the 1960s are now considered as the basic necessities for everyone. One such necessity is air conditioning. Today, almost everyone in Florida has an air conditioner system in their homes in order to cope with the blazing hot summers. Failure of an air conditioner can cause a lot of stress and panic for repairs. An air conditioner can stop due to many reasons, as simple as of a fuse tripping off. Other common causes for an air conditioner to stop working include:

 

Table Of Content:
  1. Mechanical issues
  2. Air Filters Getting Clogged
  3. Your Refrigerant Is Low
  4. The Unit Has An Old Thermostat

 

Mechanical issues

An air conditioner has 5 components:

  • Fan
  • Compressor
  • Evaporator Coil
  • Condenser Coil
  • Expansion Valve

There are two units of the AC: One inside the home where the fan blows air through the cooling evaporator coil and cools the house. The compressor, condenser coil, and another fan on the outside vent the warm air. The expansion valve controls the regulation of the refrigerant that moves between the evaporator coil and the condenser coil.

Any issues related to any of this machinery can keep your air conditioner from functioning normally. It is advisable to have a yearly checkup to prevent any of these from becoming faulty and replacing a single component is as costly as purchasing a new air conditioner.

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

 

BOOK NOW!
 

 

 

Air Filters Getting Clogged

One of the most common reasons because an air conditioner stops working is because of failure to replace the worn-out air filters on time. A clogged filter obstructs the flow of the cold air and decreases the cooling of your house. So, if you are experiencing even a little less cooling, have your air filters checked before it creates any damage to your air conditioner. It can cause your unit to leak water and also result in a clogged drain line. Here is an article about why your air filters may be getting dirtier faster.

 

Your Refrigerant Is Low

Cooling can’t happen if the refrigerant is low. The amount of refrigerant in your unit must exactly match with the amount specified by the manufacturer. There are two possibilities why your refrigerant is low – the refrigerant was not added properly when the unit was first installed or more commonly, your unit has developed a leak. Leaks are t reason for low refrigerant about 90 percent of the time. That is why you must have regular checkups of your air conditioners by authorized technicians to check for potential leaks and stop them before they occur.

 

The Unit Has An Old Thermostat

It is common to upgrade an AC unit and not a thermostat – or vice versa. Often times the thermostat is not properly calibrated with the air conditioner. As your thermostat ages, is ability to keep up with your cooling needs can diminish as parts and wires wear out. This is one reason why we, at EasyBreezy A/C, provide a new thermostat with every install.

In conclusion, there could be many factor for AC malfuctioning and we expect that these tips helped you to solve your A/C problem. If you want more orientation or you want request a service, please do not hesitate to contact us to receive more information about it!

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=

 



What To Do When Your Server Room Cooling Fails

Home » oldsmar ac and heating services

AC repair Westchase

In today’s fast-growing technological world, the server room/ data center is considered the backbone of daily organizational operations. Server room hosts their databases, network systems, servers, backup hardware and in some large companies, even the communication system is installed as well. All these devices are constantly operating and produce a great amount of heat for which state of the art cooling systems are installed to keep the steady room temperature in order to ensure the proper function of the server room devices. 

In the worst case when cooling system of the server room fails, it could be very costly for the organization if not fixed with in time and it can result in damaging of the hardware installed or even the loss of their precious data. Now when the server room cooling failure occurs there is need to take decisive and swift action.

The right actions in this regard will help the organization keep running longer and also to avoid any further serious failures. In this article, below are few helpful tips that will keep the IT administrators out of a bind if the entire cooling system has a failure.

 

Table Of Content:
  1. Call A Professional To Fix
  2. Understand And Anticipate Critical Temperature Values
  3. Time To Arrange Portable Cooling System
  4. Turn Off Unnecessary Hardware
  5. Make Arrangements For An Large Fan
  6. Backups And Plan B

 

  1. Call A Professional To Fix

The first and most important step is to know about your maintenance team. The first call you will make should be to your HVAC engineer at EasyBreezy A/C. Make sure to explain the problem in detail so that all necessary (or possible) parts and tools will be brought along for all possible scenarios and causes.

 

  1. Understand And Anticipate Critical Temperature Values

You should be familiar with the duration for which server room devices will last before the room temperature reaches its critical values. Perform a heat stress test on your current environment in order to understand and anticipate the time for which your server will last before the critical value of operating temperature.

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

 

BOOK NOW!
 

 

 

  1. Time To Arrange Portable Cooling System

If you are left with only few hours before the critical values are reached, get ready to make use of your portable cooling system if you own one or make arrangements for renting. These financial sacrifices will save you from costly consequences if you can’t get the temperature back down before the data cooling system technician arrives.

 

  1. Turn Off Unnecessary Hardware

Some types of servers, like development servers or test servers, consume more power and thus produce more heat. Such servers are not required to run during production and can be turned off to reduce heat production. Any other servers or systems that are not important should be shut off to minimize heat production.

 

  1. Make Arrangements For An Large Fan

If server room temperature rises, approaching critical temperature values, open the doors to the server room and windows, if there are any. Use (by renting or from your company supplies) any kind of fan to help pull the hot air out of the room. The best way to do this is to face the fan in the doorway, facing out so that it is sucking the warm air from behind it and blowing it out of the room.

 

  1. Backups And Plan B

Last but not the least, when dealing with cooling system failure in your data room or server room is to make sure that you have your backups prepared and maintained ahead of the time. When these backup systems are set up in advance, it will help you to successfully deal with cooling issues without losing any data or downtime.

Finally, if these tips helped you to solve your A/C problem, you want more orientation or you want to request a service, please do not hesitate to contact us to receive more information about it!

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=


DIY AC Solutions

Home » oldsmar ac and heating services

DIY AC repair and maintenance

Sometimes, little things can make your air conditioning unit stop working – things that aren’t worth paying an AC repair company to check for or fix. If, however, you check each of these things and they have not solved your problem, then you can call in an AC pro to take it from there!

The following are the simple and yet effective steps to follow to repair air conditioners:

 

  • Turn The Power Off:

    No, this isn’t an IT blog, but yes, this can help with your air conditioner too. If your AC is having trouble or won’t kick on, then the first thing you should do is to turn it off at the power source (not the thermostat). After switching off the power, wait a few moments for the system to complete shut down and then resume power. Sometimes a little reboot is all that is needed to get things acting normal again.

 

  • Fan Motor Must Be Oiled And The Condenser Cleaned:

    AC failure tends to have common culprits – the fan and the condenser. The fan motor should be lubricated using oil that is specified by the manufacturer. The condenser has to be cleaned with the use of a soft bristled brush to remove all dust that has accumulated. Wear-and-tear is one of the leading causes of AC issues.

 

 

Life’s Hard. Comfort’s Not. Hire Our AC And Heating Services today!

 

BOOK NOW!
 

 

  • Check To See That The Air Filters Are Clean:

    This is one of the most comfortable air conditioner DIY tasks but is often the cause of many problems. Since the air filters are responsible for cleaning the air before it travels through your cooling system, it should be clean. If it is a dirty filter, it will fail to capture the dust and debris in the air that can easily clog up your air conditioning system and cause problems. The recommended time frame is replace your air filter (or clean a reusable filter) is every three months. If you live with smokers, in a home prone to dust, have pets or a sensitivity to natural allergens, then you should change your filter every one or two months.

 

  • Be Sure To Check That The Thermostat Is Appropriately Working:

    If you have a digital thermostat, working batteries are essential since they power the unit. Most digital units will show in the panel if the batteries are low and even remind you of when to change the air filter. If the thermostat is in the unit itself, as in window units and some ductless systems, check that no obstructions or debris are affecting the sensor.

 

  • Condenser Coils Have To Be Cleaned, Too:

    The next step would be to make use of a garden hose to clean the condenser coils. Be sure that the coil guard is removed before being sprayed with water.

 

Maintaining and extending the life of an air conditioner is something that any homeowner can do. With regular care, your air conditioner will work well all year-round. Don’t forget to schedule routine, annual maintenance from your local AC technician at EasyBreezy AC. At least once a year your AC and heating system should get a once over to check on moving parts, lubrication, and overall functioning to see if parts need replacing or cleaning.

If these tips helped you to solve your A/C problem, you want more orientation or you want to request a service, please do not hesitate to contact us to receive more information about it!

 

We’ll Help You On All Your AC Needs!

Leave us a message and we will get back to you with help.

=


EasyBreezy AC Would Love to CONNECT With You!

Follow us